Back to home

Base Stabilization Services

Base stabilization, lifting of foundations, floors and other reinforced concrete frames

SERVICES BY TYPES OF BUILDINGS AND STRUCTURES

Houses


Strengthening buildings foundation
Lifting and leveling of foundation structures and floors
Concrete floor strengthening
Foundation repair
Cracks elimination in walls and foundations
Foundation leveling
Increasing the bearing capacity of base soils

offer-img
offer-img

WHY WE ARE THE BEST IN OUR BUSINESS

  1. TECHNOLOGY DEVELOPMENT SINCE 1978
  2. GUARANTEE ON WORKS AND SAFETY FOR 5 YEARS
  3. EUROPEAN TECHNOLOGIES AND STANDARDS
  4. I INDIVIDUAL SELECTION OF MATERIALS AND TECHNICAL SOLUTIONS FOR A PARTICULAR PROJECT
  5. EXTENSION OF FACILITY LIFETIME AND ITS COST
  6. ENVIRONMENTALLY FRIENDLY TECHNOLOGY AND WASTE MANAGEMENT
  7. BEFORE STARTING WORK WITH GEOPOLYMER INJECTION TECHNOLOGY, OUR SPECIALISTS WERE TRAINED BY OUR COLLEAGUES FROM GREAT BRITAIN, GERMANY AND THE NETHERLANDS.

DEEP STABILIZATION METHOD

Strengthening of buildings and structures foundations base soils. Eliminate causes of cracks, warping, and building tilt. Guaranteed solution and a visible result.

  • THE WHOLE COMPLEX OF WORKS: FROM AUDIT AND INSTRUMENTAL INSPECTION TO WORKS AND POST-PROJECT MONITORING.
  • WITHOUT STOPPING THE FACILITY OPERATION AND BUSINESS PROCESSES.
  • WITHOUT IMPROVEMENTS AND ADDITIONAL INVESTMENTS.
  • INSTANT VISIBLE AND INSTRUMENTALLY PROVED RESULT.
  • CLEANLINESS AND ORDER BEFORE AND AFTER WORK.
  • EU STANDARD.

offer-img
offer-img

SLAB LIFTING METHOD

  • SURVEY, PREPARATION OF DOCUMENTATION, BUDGETING, TIMING.
    First inspection of the object and consultation of a specialist – free of charge.
  • DRILLING 8-26 MM HOLES, SETTING OF PACKERS AND INJECTION OF POLYMER MORTAR INTO THE PROBLEM AREA.
    On the local area 1,5 * 1,5 m.
  • EXPANDING WITH FORCE UP TO 10 MPA, THE POLYMER MORTAR FILLS THE VOIDS, CONNECTS, STRENGTHENS AND STABILIZES THE BASE SOIL.
    Implementation of an average project – from 8 hours to two days of working time.
  • MEASURING AND RECORDING OF WORKING RESULTS WITH MEASURING EQUIPMENT.
    Accuracy +/- 0.5 mm. Warranty from 5 years.

STATI-CAL TECHNOLOGY

  • INSPECTION, IDENTIFYING THE CAUSE OF CRACKING, PREPARATION OF CONCLUSIONS AND REPORTS,
    DEVELOPING A PROJECT OF WORKS AND ESTIMATES.
    Specialist consultation and site visit for
    auditing, inspection, and collection of information on the territory of Ukraine.
  • EXECUTION OF WORKS ON REPAIRING CRACKS AND REINFORCEMENT OF WALLS WITH THE HELP OF PRE
    TENSIONED STATI-BAR REBAR.
    Reinforcement is mounted into the body of the wall using a special
    chemical mortar, which takes 30-40 minutes to harden.
  • IMPLEMENTATION OF WORKS ON THE REPAIR OF BUILDING THE PARTS BY STATI-TIE METHOD. ANCHORS UP TO 1,200 MM LONG FIX THE TRANSVERSE UNITS OF THE BUILDING AND THE UNITS OF THE WELL MASONRY.
    The anchors are installed on a base of chemical mortar or in a prepared hole in the wall by hammering with a punch.
  • AS A RESULT OF THE WORK, THE BUILDING REQUIRES MINIMAL FACADE COSMETIC REPAIRS, AND IN THE
    CASE OF BRICK, THE CONSEQUENCES OF THE WORK ARE NOT NOTICEABLE AND DO NOT REQUIRE
    RECONSTRUCTION.
  • FIXING THE RESULT OF THE WORK USING GEODETIC EQUIPMENT.
    The warranty for the absence of
    cracks and deformations is – 5 years.

offer-img